Reply To: Error 13 – Call Library Function Node in Built Executable and Installer

Home › Forums › FTDI FT4222 LabVIEW Driver Discussions › Error 13 – Call Library Function Node in Built Executable and Installer › Reply To: Error 13 – Call Library Function Node in Built Executable and Installer

March 14, 2022 at 4:55 pm #3076
Nirmal Shyam KumarNirmal Shyam Kumar
Participant

Hi Ajay,

Thanks for the suggestion and I would like to respond on behalf of Infant.

Our Typical execution steps are:

  1. Run the LabVIEW Installer (Exe and Installer created per guidelines) in the Clean machine
  2. Run the FTDI CDM Driver (the same one you mentioned in the link)
  3. Run the Executable (as mentioned by Infant, we have verified the folder to carry FTD2XX.dll)

On skipping step 2, we get FTDI driver error and at times the device is not listed in the Windows Device manager

Strangely if a system has LabVIEW (nothing else related to FTDI driver), the Executable works fine when the above steps are followed.  If the system doesn’t have LabVIEW, then we observe the FTDI driver error as indicated by Infant.

It looks like something with DLL and FTDI Driver. But we are not sure about the root cause.

Best Regards,
Nirmal Shyam Kumar.S