Aptio AMI BIOS – Auto Power ON

Home / Blogs / Aptio AMI BIOS – Auto Power ON

Recently I purchased Trigkey Mini PC and found it hard to set it to auto power on as there are very less documents. Later I found from a Facebook Post that the terminology used for such a setup is different. They use the G3 and S0-S5 keywords instead of lucid terminologies.

So to set the Aptio AMI-based PC to Auto Power ON State go to

Enter BIOS >> Chipset >> PCH-IO Configuration >> State After G3 and set to S0 State

  • S0 is Auto Power On State
  • S5 is Off State

Other State details can be found at this link

Auto Power On state in Aptio Setup AMI BIOS versino

Leave a Reply

Your email address will not be published. Required fields are marked *