Feature wall project

Home / Blogs / Feature wall project

In this blog post, I’m building in public the feature wall project from ideation to practical. The initial idea behind the feature wall is that there are not many customized or patterned features available for the self-painters to paint their wall.

Prototype 1:

In this first prototype, I’m going to figure out some appropriate sticker roll with properties such as below to

  • should stick to the wall and be removable from the wall without damaging the wall or painting on the wall.
  • should be similar to masking tape
  • should be available in a larger size (1mx1m or 1m roll) Tesa 4848
  • should be paper cuttable on machine-like Vinyl Cutter Plotter

Once discovered then follows some design for one of my walls in the house and trialing with paints.

Leave a Reply

Your email address will not be published.

%d bloggers like this: